The UTCM-1100 Curing Cabinet is used for curing of cement, concrete or other cement based mortar specimens. The curing cabinet provides (20 ± 1)°C temperature and over 90% RH humidity....
Small submersible oil filled pump with corrosion resistant nylon housing. This compact 120 GPH pump features a 1/4 in. MNPT discharge, 4.6 ft. shut-off head capability, and screened inlet.Corrosion resistant...
Tank Heaters maintain curing temperature at required 73.4°F ±3°F (23°C ±1.7°C). Number of tank heaters required will depend on tank size, ambient air temperature, and specimen loading. 120 VAC 1000 watts...
The UTC-1074 Cylinder Capping Frame is used to ensure that the planed end surfaces are perpendicular to the axis of the cylinder during the capping process. The frame comprises vertical...
The UTC-0550 Degree of Compactability (Waltz) Container is used to measure the degree of compactability of fresh concrete. Standards EN 12350-4 It consists of a 200x200x400 mm (width x depth...
Pi Tape Measure gives a quick direct single reading of average diameter with micrometer accuracy simply by placing tape around the periphery. It is used to measure round or out-of-round specimens...
16 kN measurement capacity apparatus is used for determining of bond/pull-off strength of repair mortar, hardened rendering, plastering, etc. Standards EN 1015-12, 1348, 1542, 12616-2, 13963, 14496 The apparatus is...
TSA-268 Digital Caliper, 0-12in Range features extended length range for inside, outside and depth measurements of larger samples in inches or millimeters. Quality stainless steel caliper features smooth adjusting head with...
TSA-271 Digital Caliper, 0-6in Range provides accurate inside, outside and depth measurements in inches or millimeters over a range of 6in (150mm). Resolution is 0.0005in or 0.01mm and jaw depth is...
The Apparatus are used for determining the bond strength between anchored reinforcing steel bar (rebar) and concrete and for checking anchorage performance in-situ. LPI Battery Operated Digital Readout Unit connected...
Displacement Monitor is white plastic with easy-to-read divisions indicated in red. Designed to measure both horizontal and vertical displacement movements such as settling of a floor slab, the monitor can also...
AsphaltThe UTGD-0290 (2500 W) and UTGD-0310 (2200 W) Universal Coring Machines are powerful diamond drilling units serve for shock free drilling into concrete, natural stone and asphalt with coring diameter...
Field Curing Chest is collapsible and easily fits behind a truck seat or in a car trunk. This unit protects concrete specimens from harsh weather conditions and eliminates the time and...
Flexural test device for center-point or two-point (third-point- ASTM) loading flexural tests on concrete beams of 100x100x400-500 mm,150x150x600-750 mm. Consist of two upper rollers and two lower rollers of 25...
UTC-5501 Flexural Testing Assembly for Concrete Beams The test assembly, conforming with EN 12390-5, ASTM C78, ASTM C293, BS 1881:118, is used for center or two-point (third-point loading-ASTM) loading flexural...
There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual...
