The concrete field testing kit is designed to ensure compliance with the CSA A23.2-19-4C, CSA A23.2-19-5C, and CSA A23.2-19-6C standards. Choose from these two options tailored to your specific needs: Option 1: CSA...
Glass Plate is a 12in (305mm) square, 0.375in (9.525mm) thick, a top surface-ground glass plate with seamed edges. It meets ASTM D4318 for testing the plastic limit of soils and can...
The mixers have been designed to mix mortars, cement and asphalt primarily to the requirements of standards. The mixing paddles have a planetary motion and is driven by a motor...
Steel Unit Weight Measures are suitable for non-specification checks of unit weight and void content of aggregates. Measures can also be used to determine the unit weight of concrete or...
Scrub Brushes for concrete testing equipment are available in an 8in (203mm) short-handled model or a 20in (508mm) long-handled brush and stand up to heavy everyday use in the field. Both feature...
Measur offers a wide array of round-bowl and flat-bottom scoops ideal for lab and field use, designed to handle sample materials ranging from fine dry powders to wet concrete.
K-Slump Tester is used to quickly determine the approximate concrete slump and workability. The tester is inserted into the concrete up to the level of the disc. After 40 seconds, the...
The UTEST fixed amplitude vibrating tables are compact units providing controlled vibro-compaction for cube or cylinder moulds. Vibrating tables consist of vibrating motor, command unit and clamping assembly. Standards...
UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibrating table, cylindrical bucket, slump...
The Slump test method is used for the determination of the consistency and workability of fresh concrete. UTC-0406A Slump Cone Funnel, made of seamless spun steel, should be ordered separately....
The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar, especially when there are large numbers of specimens to be...
The J-Ring Test is used for determining the passing ability of self-consolidation concrete. Except J ring, the apparatus can be used for performing the slump-flow test. Standards ASTM C1611, C1621...
Precision Cast Aluminum Unit Weight Measures are preferred to determine the unit weight, yield, and gravimetric air content of fresh concrete or void content of aggregates to ensure high-quality pavements...
The UTC-0715 is designed for the determination of initial setting time of fresh concrete for field and laboratory use. Standards AASHTO T197; ASTM C403 Stainless steel plunger has 32.3 mm²...
The UTC-0700 and UTC-0701 Concrete Mortar Penetrometers are used for the determination of setting time of the mortar fraction of fresh concrete. The apparatus consist of a spring loading device....
The difference of UTC-0742 and UTC-0752 from conventional mixers (UTC-0750, UTC-0751) is their ability of preparing more homogeneous mixture in a short time through the second motor that rotates the...
To find out the effects of the different type constituents on the concrete properties requires the preparation of numerous and higher volume of concrete batches such as RCC (Roller Compacted...
The efficient mixing of concrete is essential if quality specimens are to be manufactured. Pan Type Concrete Mixers are designed to give efficient mixing of both dry and wet materials....
