Semi-Automatic Compression Testing Machines for Cylinders

UTC-4601.SLP, UTC-4701.SLP, UTC-4602.SLP, UTC-4702.SLP, UTC-4712.SLP, UTC-4722.SLP and UTC-4732.SLP Semi-Automatic Compression Testing Machines for  compression testing of cylinders are manufactured acc. to ASTM & AASHTO standards

ASTM C39; AASHTO T22

These machines also meet the requirements of CE norms with respect to the health and safety of the operator. And their user-friendly design enable an inexperienced operator to perform the test.

The Machines consist of a welded frame ( see below table), hydraulic power pack (UTC-4820) with LPI battery operated digital readout unit (UTC-4920LP).

UTC-4680 or UTC-4682 Pedestal for the frames of the machines should be ordered separately.

Main Features

• Class A starting from with the 5% of the machine capacity, (Special calibration option starting from 1% of the full range with UTC-0210)
• 1 channel with two different calibration table, test parameters and specimen  information (by changing the sensor belong to other frame, the unit can be control for second test frame)
• Multi-point calibration 
• Real time numeric display of load and load pressure
• Peak hold property
• Welded steel walled frame with lower and upper (spherically-seated) loading platens
• Load measurement with a pressure transducer
• Hydraulic pump with dual stage for rapid approach
• RS232  Serial port for PC or thermal or dot matrix printer
• Free of charge Utest software for compression/flexture testing machines(USOFT-4820.SLP) for compression, flexture, splitting tensile strength tests of construction materials such as concrete, cement, brick/masonry units

Safety Features

• Maximum pressure valves to avoid machine overloading
• Limit switch for piston stroke
• Removable transparent front and rear safety doors

USOFT-4820.SLP Test Software is improved for semi-automatic concrete compression and flexural testing machines with LPI Battery Operated Digital Readout Unit during the test to collect and record data and to prepare the report containing the results obtained.Before the test, a PC which the Utest software is installed is connected to RS232 port of LPI reading unit, the data obtained in the test can be monitored and recorded in real time. The advanced functions for data base management provide an easy navigation of all saved data. Test report including the test results and user defined test information (names and the Company details, test type, specimen type, user info and other knowledge required) can be print out.

ASTM & AASHTO  LOW CAPACITY SEMI-AUTOMATIC COMPRESSION TESTING MACHINES FOR CYLINDERS
Models	UTC-4601.SLP	UTC-4701.SLP	UTC-4602.SLP	UTC-4702.SLP
Product Photo
Capacity	600kN (135000 lbf)	1100 kN (245000 lbf)	600kN (135000 lbf)	1100 kN (245000 lbf)
Frame Type	Welded Steel	Welded Steel	Welded Steel	Welded Steel
Lower Bearing Block, Dimensions (D)	Ø105 mm (4,13”)	Ø105 mm (4,13”)	Ø 165 mm (6,50")	Ø 165 mm (6,50")
Upper Bearing Block, (With Spherically Seating Assembly) Dimensions (C)	Ø 165 mm (6.5”)	Ø 165 mm (6.5”)	Ø 165 mm (6,50")	Ø 165 mm (6,50")
Surface Hardness of Bearing Blocks	≥ 55 HRC	≥ 55 HRC	≥ 55 HRC	≥ 55 HRC
Flatness Tolerance	0,02 mm / 150 mm (0,001”/6”)	0,02 mm / 150 mm (0,001”/6”)	0,02 mm / 15 0mm (0,001”/6”)	0,02 mm / 150 mm (0,001”/6”)
Piston Diameter	150 mm (5,9”)	190 mm (7,48”)	150 mm (5,9”)	190 mm (7,48”)
Piston Stroke	50 mm (1,97”)	50 mm (1,97”)	50 mm (1,97”)	50 mm (1,97”)
Maximum Vertical Clearance Between Bearing Blocks (E)	340 mm (13,4”)	380 mm (15”)	340 mm (13,4”)	380 mm (15”)
Horizontal Clearance (B)	230 mm (9,06”)	270 mm (10,6”)	230 mm (9,06”)	270 mm (10,6”)
For Cylinder Specimens Sizes	Ø100x200 mm  (4”x8”)	Ø100x200 mm  (4”x8”)	Ø100x200 mm (4”x8”) Ø150x300mm(6”x12”)  (**)	Ø100x200 mm (4”x8”) Ø150x300mm(6”x12”) Ø160x320 mm
Power	550 W	550 W	550 W	550 W
Oil Capacity	20 L	20 L	20 L	20 L
Maximum Working Pressure	340 Bar	390 Bar	340 Bar	390 Bar
Dimensions (wxlxh) (Axd*xF)	570x454x922 mm (22,44”x17,87”x36,3”)	610x454x1042 mm (24,02”x17,87”x41,02”)	570x454x922 mm (22,44”x17,87”x36,30”)	610x454x1042 mm (24,02”x17,87”x41,02”)
Weight	350 kg (770 lbs)	448 kg (990 lbs)	361 kg (795 lbs)	459 kg (1010 lbs)
Pedestal (Optional)	UTC-4680	UTC-4680	UTC-4680	UTC-4680
(d*) depth       (**) Limited by capacity of the  frame   The Machines are supplied complete with; • UTC-4601.SLP and UTC-4602.SLP : Ø100mm(3,93”), 50mm(1,97”), 30mm(1,2”) height x Ø165mm(Ø 6,5”) distance pieces • UTC-4701.SLP, UTC-4702.SLP and UTC-4712.SLP : Ø100mm(3,93”), 50mm(1,97”), 2 pcs. 30m(1,2”)mm height x Ø165mm(Ø 6,5”) distance pieces • Removable transparent front and rear safety doors