The J-Ring Test is used for determining the passing ability of self-consolidation concrete. Except J ring, the apparatus can be used for performing the slump-flow test. Standards ASTM C1611, C1621...
Precision Cast Aluminum Unit Weight Measures are preferred to determine the unit weight, yield, and gravimetric air content of fresh concrete or void content of aggregates to ensure high-quality pavements...
The UTC-0580 Compacting Factor Apparatus is used to determine the compaction factor of concrete with low, medium and high workability. Standards BS 1881-103, 5075 Comprising two conical hoppers having a...
The UTC-0550 Degree of Compactability (Waltz) Container is used to measure the degree of compactability of fresh concrete. Standards EN 12350-4 It consists of a 200x200x400 mm (width x depth...
UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibrating table, cylindrical bucket, slump...
The Slump test method is used for the determination of the consistency and workability of fresh concrete. UTC-0406A Slump Cone Funnel, made of seamless spun steel, should be ordered separately....
A wide range of flexural testing machines to support specific requirements of clients can be custom produced. Some examples of special flexural machines and frames produced by Utest are shown...
UTC-5501 Flexural Testing Assembly for Concrete Beams The test assembly, conforming with EN 12390-5, ASTM C78, ASTM C293, BS 1881:118, is used for center or two-point (third-point loading-ASTM) loading flexural...
Servo Controlled Universal Automatic Bending Test Machines are specially configured for energy absorption capacity tests on fiber reinforced sprayed concrete specimens. Standard EN 12390-5, 1339, 1340, 14488-3, 14488-5; ASTM C...
The UTEST Automatic range of 100 kN, 300 kN and 600 kN capacity flexure testing machines have been designed for reliable and consistent testing of flexural test on standard concrete...
The UTEST Semi-Automatic range of 200 kN capacity flexure testing machine was been designed for reliable and consistent testing of flexural test on standard concrete beams, concrete or natural stone...
UTEST 600 kN capacity Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four column design carrying the ram...
The UTB-1430 Force Ductility Testing Machine is used to determine the the deformation energy required to stretch a bitumen sample from 200 mm elongation to 400 mm elongation. Force ductility...
The UTB-1400 Ductility Testing Machine is used to determine the ductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min....
The UTB-1500 is used for the examination of cut-back asphaltic materials by the distillation test. The apparatus consists of a distillation flask, condenser, adapter, shield, electric heater with thermoregulator, cylinder...
The UTB-1360 TAG Open Cup Flash Point Tester is used for determination of flash points of. The test set consists of an electric furnace with electronic controller of heating power,...
The UTB-1350 Cleveland Flash Tester is used for determining the flash and fire point of petroleum products. It consists of a brass cup mounted on an electric heater with a...
The Saybolt Viscometer is used to determine empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures. The time it takes for a 60mL sample to flow through a...
