16 kN measurement capacity apparatus is used for determining of bond/pull-off strength of repair mortar, hardened rendering, plastering, etc. Standards EN 1015-12, 1348, 1542, 12616-2, 13963, 14496 The apparatus is...
CorroMap is developed for measuring related values of corrosion rate, electrochemical potential and electrical resistance and thereby quickly assess the state of corrosion of the embedded reinforcement. The equipment is...
This simple test set is used for determination of carbonation depth of the carbonated layer near the surface of hardened concrete. It is not suitable for concrete made with calcium...
UTC-4050 Crack Microscope is a high definition device which is used for measuring crack widths both in concrete and other structures like masonry walls. Consists of an adjustable lamp unit...
Mechanical Strain Gauges are used for determining the length changes in different parts of a structure. These strain gauges are especially designed to perform measurement on concrete structures but they...
Cracks occur in most buildings and civil engineering structures. Monitoring the changes in crack width is an important diagnostic technique for determining the cause and specifying the remedial work. UTC-3100...
The measurement of pulse velocity can be used for the determination of the uniformity of concrete, the presence of cracks or voids, changes in properties with time and in the...
Ultrasonic Pulse Velocity Tester is used to measure the velocity of propagation of ultrasonic pulses through concrete. A pulse of longitudinal vibrations is produced by an electro-acoustical transducer held in...
The quality of concrete is mainly judged by its compressive strength directly affecting the load-bearing capacity and durability of concrete structures. Standards EN 12504-2, 13791; ASTM C 805; C 5873;...
The Bosch PDO Multi Digital Detector locates a variety of metal and wooden structures behind walls with the highest precision, ensuring safety before drilling into the wall. Invest in a...
The PM8000 Profometer Rebar Diameter and Cover Meters are advanced tools used for locating and assessing rebars in concrete structures. The sensor can detect individual rebars, measure concrete cover at...
UTC-3000 Bartracker Concrete Covermeter is used to measure the thickness of concrete cover over steel reinforcement bars and metal pipes, furthermore it is also used to identify the location, orientation...
Profometer PM-630 Rebar Detector is an advanced cover meter to detect location of rebars, measurement of concrete cover and bar diameters non-destructively by using the eddy current principle with pulse...
Determining the position, depth and diameter of rebar can be detected in any constructions by Rebar Detector and can be displayed the results by UTC-2082. Rebar Detector & Monitor is...
The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened concrete and hydraulic cement mortar. Standards ASTM-C157, C1105, ASTM C151, C452, C490,...
Rapid Chloride Permeability Test Equipment (RCPT) is used to evaluate the resistance of a concrete sample to the penetration of chloride ions. Test is performed by placing a 100 mm...
Used for the determination of the depth of penetration of water to hardened concrete specimens under pressure. 3 or 6 specimen capacity models and with and without quantitative measurement equipment...
UTC-0980-C Accelerated Curing Tank is designed for curing concrete specimens according to ASTM C1768 (Procedure A - Warm Water Method) and BS 1881:Part 112 (35°C Method and 55°C Method). Standards...
