Glass Plate is a 12in (305mm) square, 0.375in (9.525mm) thick, a top surface-ground glass plate with seamed edges. It meets ASTM D4318 for testing the plastic limit of soils and can...
Standard Crack Monitor has a simple design, is easy-to-use, and provides a measurement range of 20mm (0.78in) horizontally and 10mm (0.39in) vertically. The unit consists of an overlapping upper plate that...
Standard Crack Monitor has a simple design, is easy-to-use, and provides a measurement range of 20mm (0.78in) horizontally and 10mm (0.39in) vertically. The unit consists of an overlapping upper plate that...
Crack Monitor Plus is made of clear polycarbonate. Adjustable slots for screws provide secure placement and tamper resistance. Once in place, the monitor’s two plates can move independently. Monitoring in three dimensions...
Crack Width Gauge measures the width and length of cracks in concrete structures, pavements, and other structural materials like plaster or drywall. It is constructed of durable clear polycarbonate plastic. The gauge...
Corner Adapter has a rigid construction and can be used with Crack Monitors for monitoring internal or external corner angles of 70°—180°. Features: Monitors corner angles of 70°—180°. Slotted openings on one side...
Displacement Monitor is white plastic with easy-to-read divisions indicated in red. Designed to measure both horizontal and vertical displacement movements such as settling of a floor slab, the monitor can also...
The Perpendicularity Verification Device (PVD) is a new tool to verify the proper alignment of concrete cylinders during compressive strength testing. The latest revisions to ASTM C39/39M require verification that...
Portable Beam Tester transports and sets up easily for rapid field checks of 6x6in (152x152mm) concrete beam specimens with a minimum length of 20in (508mm). Conversion between third-point and center-point flexural...
Gray Iron 9000 Capping Compound is a new and improved sulfur mortar capping compound that ensures even load distribution during concrete strength testing. Ultra-thin, low-odor flakes are carefully formulated from sulfur and...
Plastic Cylinder Molds are for single-use concrete cylinder testing applications. They are nonabsorptive and molded as single-piece units for dimensional uniformity. These rugged molds have an unlimited shelf life and are weather-resistant. Plastic...
Heater/Circulator provides highly accurate temperature control to ±0.09°F (0.05°C) for fluid tanks and baths up to 7.4gal (28L)¹ from ambient + 9° to 302°F (ambient + 5° to 150°C). Heating capacity...
Small submersible oil filled pump with corrosion resistant nylon housing. This compact 120 GPH pump features a 1/4 in. MNPT discharge, 4.6 ft. shut-off head capability, and screened inlet.Corrosion resistant...
Tank Heaters maintain curing temperature at required 73.4°F ±3°F (23°C ±1.7°C). Number of tank heaters required will depend on tank size, ambient air temperature, and specimen loading. 120 VAC 1000 watts...
Aquafog® Fogging Fans humidify concrete curing rooms up to 40ft (12m) long. The self-flushing system forces water through the fan blades, atomizing as the liquid exits the blades. High-speed centrifugal force...
Field Curing Chest is collapsible and easily fits behind a truck seat or in a car trunk. This unit protects concrete specimens from harsh weather conditions and eliminates the time and...
Thermocure Concrete Curing Boxes accommodate up to (22) 6x12in (152x302mm) or (46) 4x8in (102x203mm) concrete cylinders for proper initial curing and protected storage within standard humidity/temperature conditions. Cylinders can be...