10x Optical Comparator allows for convenient identification of sieve opening sizes and close examination of the wire cloth condition. The comparator has precision scales in inch and millimeter units that are...
The products are used for monitoring of temperature development of mass concrete. The number of measurement points for connectors and the cable length needed for each measurement point should be...
UTEST 600 kN capacity Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four column design carrying the ram...
UTC-0980-C Accelerated Curing Tank is designed for curing concrete specimens according to ASTM C1768 (Procedure A - Warm Water Method) and BS 1881:Part 112 (35°C Method and 55°C Method). Standards...
The UTC-0650 and UTC-0651 Air Entrainment Meters are used for determining the air content of fresh concrete. Standards EN 12350–7; ASTM C231; AASHTO T152; BS 1881:108 They consist of a...
Precision Cast Aluminum Unit Weight Measures are preferred to determine the unit weight, yield, and gravimetric air content of fresh concrete or void content of aggregates to ensure high-quality pavements...
UTC-4706.FPR, UTC-4716.FPR, UTC-4726.FPR and UTC-4736.FPR models Automatic Compression Testing Machines have been designed for compression testing of blocks acc. to ASTM standards. These machines also meet the requirements of CE...
UTC-4725.FPR and UTC-4735.FPR models Automatic Compression Testing Machines have been designed for testing both blocks and cylinders specimens with the same frame according to ASTM standards. These machines also meet...
UTC-4701.FPR, UTC-4701.FPR, UTC-4602.FPR, UTC-4702.FPR, UTC-4712, UTC-4722.FPR and UTC-4732.FPR models Automatic Compression Testing Machines are manufactured for compression testing of acc. to ASTM & AASHTO standards. These machines also meet the...
The UTEST Automatic range of 100 kN, 300 kN and 600 kN capacity flexure testing machines have been designed for reliable and consistent testing of flexural test on standard concrete...
The UTC-1040 Automatic Grinding Machine provides fast grinding of cylinder specimen ends to obtain plane and parallel surfaces according to EN and ASTM standards. Standards EN 12390-1, 12390-3, 12504-1; ASTM...
The UTC-1060 Automatic Grinding Machine provides fast grinding of concrete, rock, natural stone. etc. specimens to obtain plane and parallel surfaces according to EN and ASTM standards. Standards EN 12390-1,...
The mixers have been designed to mix mortars, cement and asphalt primarily to the requirements of standards. The mixing paddles have a planetary motion and is driven by a motor...
UTC-3000 Bartracker Concrete Covermeter is used to measure the thickness of concrete cover over steel reinforcement bars and metal pipes, furthermore it is also used to identify the location, orientation...
UTC-0720 is used for determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Standards ASTM C 232; EN 480-4 Dimensions...
This simple test set is used for determination of carbonation depth of the carbonated layer near the surface of hardened concrete. It is not suitable for concrete made with calcium...
All moulds have been manufactured from steel except UTCM-0898 molded using engineered plastic and all internal surfaces are machined. Standards EN 196-1; ASTM C109, C348;BS 4550 Minimum surface hardness of...
The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened concrete and hydraulic cement mortar. Standards ASTM-C157, C1105, ASTM C151, C452, C490,...