Length Comparators are used to determine the length changes on different type of hardened mortar and concrete prisms with different sized. The sets consist of a length measuring frame with...
Slaking Vessel is used to determine the yield of lime by leaving the lime sample to slake into. Stainless steel made and double walled insulated. The cylinder has inside dimensions...
The UTEST Semi-Automatic (Motorized) range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These...
The UTEST Plunger Penetration Apparatus is used to determine the consistency of fresh mortar, building lime and masonry cement. The test apparatus consists of a base to place the test...
The UTD Series Muffle Furnaces are widely used for determining various properties of construction materials, and they cover a temperature range from 1100°C to 1600°C, they are all front loading...
UTD-1462 Muffle Furnace is used for determining the loss on ignition and insoluble residue of cement and building lime. Working temperature and time can be programmed with PID digital control...
The Mud Balance, an ideal equipment for site applications, provides an accurate and easy method for determining the mud density. The accuracy of the readings is not affected by the...
The UTCM-0750 Marsh Funnel Viscometer is used for the determination of flow time by the use of flow cups of fluid materials such as paint, varnish etc. Manufactured from break...
The UTCM-0016 Le Chatelier Water Bath is used with Le Chatelier moulds for the determination of the soundness of cement paste fly ash for concrete and lime. The internal chamber...
The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (UTCM-0016) according to the relevant standard. Standards...
The UTCM-0003 Le Chatelier Flask is used to determine the density of hydraulic cement, ground granulated blast-furnace slag and fly ash for concrete, filler aggregates and lime. The glass flask...
Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height...
The UTCM-0020 High Pressure Cement Autoclave is designed to perform expansion tests on cement specimens. 10 specimens can simultaneously be tested in the high pressure steam vessel of 154 mm...
The UTCM-0240 Blaine Air Permeability Apparatus is used to determine the fineness of Portland cement, limes and similar powders expressed in terms of their specific surface. Standards EN 196-6; ASTM...
The setting time determination of cement/mortar/gypsum is one of the most important parameter for the quality inspection and verification. The machine is based on the innovative CVI-TECH philosophy. On the...
