Call Us: +1 866 300 9012

contact@measur.ca

Call Us: +1 866 300 9012

contact@measur.ca
SHOPPING CART

No Products in the Cart

TOTAL:
$0.00
Semi-Automatic Compression Testing Machines for Blocks
Semi-Automatic Compression Testing Machines for Blocks
Semi-Automatic Compression Testing Machines for Blocks
Semi-Automatic Compression Testing Machines for Blocks

    Semi-Automatic Compression Testing Machines for Blocks

    $1.00

    UTC-4716.SLP, UTC-4726.SLP and UTC-4736.SLP Semi-Automatic Compression Testing Machines for  compression testing of blocks are manufactured acc. to ASTM standards


    Standards

    ASTM C140, C1314

    These machines also meet the requirements of CE norms with respect to the health and safety of the operator. And their user-friendly design enable an inexperienced operator to perform the test.

    The Machines consist of a welded frame ( see below table), hydraulic power pack (UTC-4820) with LPI battery operated digital readout unit (UTC-4920LP).

    UTC-4680 or UTC-4682 Pedestal for the frames of the machines should be ordered separately.

     

    Main Features

    • Class A starting from with the 5% of the machine capacity, (Special calibration option starting from 1% of the full range with UTC-0210)
    • 1 channel with two different calibration table, test parameters and specimen  information (by changing the sensor belong to other frame, the unit can be control for second test frame)
    • Multi-point calibration 
    • Real time numeric display of load and load pressure
    • Peak hold property
    • Welded steel walled frame with lower and upper (spherically-seated) loading platens
    • Load measurement with a pressure transducer
    • Hydraulic pump with dual stage for rapid approach
    • RS232  Serial port for PC or thermal or dot matrix printer
    • Free of charge Utest software for compression/flexture testing machines(USOFT-4820.SLP) for compression, flexture, splitting tensile strength tests of construction materials such as concrete, cement, brick/masonry units

     

    Safety Features

    • Maximum pressure valves to avoid machine overloading
    • Limit switch for piston stroke
    • Removable transparent front and rear safety doors

     

    USOFT-4820.SLP Test Software is improved for semi-automatic concrete compression and flexural testing machines with LPI Battery Operated Digital Readout Unit during the test to collect and record data and to prepare the report containing the results obtained.Before the test, a PC which the Utest software is installed is connected to RS232 port of LPI reading unit, the data obtained in the test can be monitored and recorded in real time. The advanced functions for data base management provide an easy navigation of all saved data. Test report including the test results and user defined test information (names and the Company details, test type, specimen type, user info and other knowledge required) can be print out.

     

    ASTM SEMI-AUTOMATIC COMPRESSION TESTING MACHINES FOR BLOCKS

     

     

     

    Models

    Photo

     

     

     

    Models

    UTC-4706.SLP

    UTC-4716.SLP

    UTC-4726.SLP

    UTC-4736.SLP

    Capacity

    1100 kN (245000 lbf)

    1500 kN (335000 lbf)

    2000 kN (450000 lbf)

    3000 kN (670000 lbf)

    Frame Type

    Welded Steel

    Welded Steel

    Welded Steel

    Welded Steel

    Lower Bearing Block, Dimensions (D)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    310x410x90mm

    (12.2”x16.1”x3.5”)

    Surface Hardness of Bearing Blocks

    60 HRC

    60 HRC

    60 HRC

    60 HRC

    Flatness Tolerance

    0,025 mm / 150 mm (0,001”/6”)

    0,025 mm / 150 mm (0,001”/6”)

    0,025 mm / 150 mm (0,001”/6”)

    0,025 mm / 150 mm (0,001”/6”)

    Piston Diameter

    230 mm (9,06”)

    230 mm (9,06”)

    250 mm (9,84”)

    310 mm (12,2”)

    Piston Stroke

    50 mm (1,97”)

    50 mm (1,97”)

    50 mm (1,97”)

    50 mm (1,97”)

    Maximum Vertical Clearance

    Between Bearing Blocks (E)

    250 mm (9,84”)

    250 mm (9,84”)

    250 mm (9,84”)

    250 mm (9,84”)

    Horizontal Clearance (B)

    320 mm  (12,6”)

    320 mm  (12,6”)

    360 mm (14,17”)  

    415 mm (16,34”)

    Power

    550 W

    550 W

    550 W

    550 W

    Oil Capacity

    20 L

    20 L

    20 L

    20 L

    Maximum Working Pressure

    390 Bar

    370 Bar

    410 Bar

    410 Bar

    Dimensions (wxlxh) (Axd*xF)

    680x451x1104 mm  (26,77”x17,76”x43,86”)

    680x451x1104 mm

    (14,96”x17,76”x43,86”)

    720x453x1144 mm (16,54”x17,83”x45,04”)

    775x497x1204 mm

    (18,7”x19,57”x47,4”)

    Weight

    793 kg (1750 lbs)

    793 kg (1750 lbs)

    880 kg (1940 lbs)

    1102kg (2430 lbs)

    Pedestal (Optional)

    UTC-4680

    UTC-4682

    UTC-4682

    UTC-4682

    (d*) depth      

    (**) Limited by capacity of the  frame

     

    The Machines are supplied complete with;

    • Ø100 mm (3.93”), 50 mm 1.97”), 2 pcs. 30 mm (1.2”), 15 mm (0.59”) height x Ø165 mm (Ø6.5”) distance pieces

    • Lifting Device for Lower Bearing Platen(UTC-4629)

    • Removable transparent front and rear safety doors

    BACK TO TOP