Call Us: +1 866 300 9012

contact@measur.ca

Call Us: +1 866 300 9012

contact@measur.ca
SHOPPING CART

No Products in the Cart

TOTAL:
$0.00
MMS Model 3630 for Asphalt Plants

    MMS Model 3630 for Asphalt Plants

    $1.00

    Measures Moisture Content as the Aggregate Moves Through the Plant

    The MMS Model 3630 uses proven nuclear technology to continuously monitor moisture in your aggregate mix.

    The moisture measurement occurs as the mix moves through the plant on the conveyor belt. There is no physical contact with the aggregate mix or belt. The system provides a continuous reading of the moisture content. The moisture content, combined with the knowledge of the mass proportions of the other components in the mix, provides you with a precise and reliable moisture content of the aggregate.

    Saves Time and Money

    An unknown change in moisture of the raw materials (often due to weather) will have a large impact on the quality and performance of the product made at your asphalt plant. With the MMS, moisture content of the combined aggregate is always known.

    Knowing the correct dry weights of aggregate allows for more accurate mixing, resulting in savings by eliminating wasted binder. Additionally, knowing the moisture content of the aggregate mix entering the drum allows optimum temperature control resulting in additional savings from fuel.

    Moisture Data can be Sent to Your Controls or Displayed in the Control Room

    The MMS sends a standard signal as a current or voltage which can be sent to the control system for display to aid in the control of the plant parameters.

    An optional control center is available to display, archive, and print the moisture data for your company's requirements.

     

    Measurement Specifications

    Precision (expressed as 1 standard deviation) @ 3% wt/wt Moisture and 2.2 g/cm3 density

                         Count Time

    5 seconds

    10 seconds

    3” thick sample

    ±0.4 to 0.5% wt/wt

    ±0.3 to 0.4% wt/wt

    4” thick sample

    ±0.32 to 0.4% wt/wt

    ±0.25 to 0.32% wt/wt

    5” thick sample

    ±0.28 to 0.35% wt/wt

    ±0.22 to 0.28% wt/wt

    Mechanical Specifications

    Top Enclosures

        Dimensions

        Weight

     

    18.8” x 14.5: L x 57.5” W

    57.2 lbs.

    Bottom Enclosure 1

        Dimensions

        Weight

     

    6.8” H x 15.75” L x 15” W

    62.4 lbs.

    Bottom Enclosure 2

        Dimensions

        Weight

     

    9.5: H x 15.75” L x 15” W

    62.4 lbs.

    Mounting Frames

        Dimensions

        Weight

     

    30.1: x 19” L x 53” W

    55.7 lbs.

    Electrical and Environmental Specifications

    Operating Temperature

    32 ° to 140 ° F ( 0 ° to 60 ° C)

    Humidity

    98% non-condensing

    Supply Voltage

    120 VAC (±10%), 1A, 60 Hz

    Standard Signal Output

    0 to 20 mA, 4 to 20 mA or 0 to 10V isolated analog output

    User Interface

    (HMI for Maintenance)

    8.0” Fanless Industrial Touch Panel PC

    IP65 rated front panel

    1024 x 600 (WSVGA) Native resolution

    Radiological Specifications

    The MMS contains small sealed radioactive sources. The system is registered as a generally licensed device and distributed as such.

    BACK TO TOP